Specification
Output Power | 2000 Watts |
Low Frequency Driver | 10.0” driver, 2.0” (50 mm) high-temperature voice coil. 1 x 650 W RMS @ 2 Ω. |
High Frequency Driver | 1.0” exit ceramic driver with 1.4” (35 mm) coil. 1 x 350 W @ 4 Ω. |
Crossover Frequency | 2 kHz |
Maximum SPL | 130 dB (peak), 127 dB (continuous) (dB-SPL @ 1 m) |
Frequency Response | 57 Hz – 20 kHz (+/-3 dB) |
Frequency Range | 48 Hz – 20 kHz (-10 dB) |
Horn Coverage | 90° horizontal x 60° vertical (nominal) |
Connectors | (2) XLR+1/4” (6.35 mm) TRS combo inputs (Balanced) |
(1) XLR output (Link) | |
(1) IEC power cable input | |
Input Impedance Line | 10 KΩ balanced, 20 KΩ unbalanced, Mic: 1.2K |
Line Gain/Volume Control Range | -∞ to 0 dB, +4 dBu nominal, +10 dBu for max output |
Mic/Inst. Gain / Volume Control Range | -∞ to +50 dB |
USB Chargin Port | 5V 2.1A |
Controls | Power switch, (2) gain control knobs (1 per input), (2) Mic/Line switches, Blue-tooth volume control encoder, Pairing button, Stereo Link button, Sub Size button, Speaker Use button |
Indicators | (1) Input Channel Signal/Limit/Clip LED (Green = Ch1/2 Signal) (Yellow = Ch1/2 Limiter) (Red = Ch1/2 Output Clipped) |
(1) Bluetooth LED (Blue) | |
(1) Link LED (Orange) | |
(4) DSP Presets LED (Green) | |
(3) HPF LED (Green) | |
Power Connection | IEC |
Voltage | 100-120V, 50/60Hz; 220-240V, 50-60Hz |
Consumption | 900 Watts |
Fuse | 100-120V T10AL AC250V; 220-240V T5AL AC250V |
Protection | Electronic clip, thermal, and transducer overdrive protection |
Enclosure | Injected Moulded Enclosure and Perforated Metal Grille |
Mounting/Installation | Standard 36 mm pole socket, flown application, suspended with integral M10 points, or in a wedge monitor position |
Operating Temperature | 10°C to 45°C (14°F to 113°F) |
Dimensions (height x width x depth) | 21.1” x 12.6” x 12.5” / 536 x 320 x 317 mm |
Weight | 26.0 lbs. / 11.8 kg |
Reviews
There are no reviews yet.