Specification
Pads | Built-in Pads: 9 (with LED Indicators) – Two external trigger inputs are provided, allowing you to connect up to four Pads. |
Maximum Polyphony | 20 voices – Maximum polyphony becomes 16 voices according as an operating state. |
Number of Recordable Wave Data | 10,000 – Including preload wave data. |
Sampling Time (Total time for all wave data) | Approx. 360 min. in stereo (720 min. in mono) – Since the internal memory included with the SPD-SX contains preload data, the available sampling time will be less than the time above. |
Data Format | 16-bit linear PCM (WAV/AIFF) |
Sampling Frequency | 44.1 kHz |
Kits | 100 |
Kit Chain | 8 chains (20 steps per chain) |
Effects | Master Effects (21 Types) |
Equalizer | |
Kit Effect 1 (20 Types) | |
Kit Effect 2 (20 Types) | |
Display | Graphic LCD 128 x 64 dots |
Connectors | PHONES jack (Stereo 1/4-inch phone type) |
MASTER OUT jacks (L/MONO, R) (1/4-inch phone type) | |
SUB OUT jacks (L/MONO, R) (1/4-inch phone type) | |
AUDIO IN jacks (L/MONO, R) (1/4-inch phone type) (with LINE-MIC GAIN control) | |
TRIG IN jacks (1/2, 3/4) (1/4-inch TRS phone type) | |
FOOT SW jack (1/2) (1/4-inch TRS phone type) | |
MIDI connectors (IN, OUT) | |
DC IN jack | |
COMPUTER connector | |
USB MEMORY connector | |
Interface | Hi-Speed USB (USB-MIDI, USB-AUDIO, USB Mass Storage Class, USB Flash Drive) |
Power Supply | DC 9 V (AC Adaptor) |
Current Draw | 600 mA |
Firmware Update Ver.1.08 introduces the following features
- Advanced Noise Cancel Parameter is added, specific for the use of “RT-30K” and “RT-30HR.”
- Added “RT30K”, “RT30HR”, “RT30H_SN”, “RT30H_TM”, “KT10”, “BT-1”, “PDX-100”, “PD-108” and “PD-128” to the Trigger Type.
- Improved a stability on a USB connection.
Reviews
There are no reviews yet.